SKF 61805/MTF6VS072 Single Row Ball Bearings

SKU:f692x-2z-zen; B:3.5mm; Availability:In Stock; Cage Type:Steel; Clearance:Standard; Weight:0.20 KGS; d:2.5mm; Seals or Shields:Two Metal Shields; D:7mm;

A2:33 mm; H2:83 mm; L:144 mm; T max.:100 °C; Designation of housing:T208N-; B:29 mm; N1:19 mm; L2:16 mm; Adapter sleeve reference:H2308; A:49 mm;

Cg - Geometry Factor7:0.11; Y - ISO Factor1:0.99; K - Factor3:0.96; Y2 - ISO Factor6:1.66; r - Cup Frontface To Clear Radius2:0.06 in; Y1 - ISO Factor5:1.11; C - Double Cup Width:2.9300 in; D:7.7500 in; Da - Cup Frontface Backing Diameter:7.40 in; e - ISO Factor4:0.61;

D:160mm; Seals or Shields:Open Type; Static Load Rating (kN):521; Availability:In Stock; Cage Type:Steel; SKU:23218kejw33-timken; d:90mm; Limiting Speed Rating (r/min):2600; Weight:4.50 KGS; Dynamic Load Rating (kN):436;

H2:70 mm; A1:21 mm; C0:7.88 kN; Designation of housing:PAE205N-; N:M10; H1:10 mm; J:50.8 mm; H:36.5 mm; A:36 mm; Designation of bearing:UC205-15G2T04;

T max.:100 °C; P:150 mm; A5:19.7 mm; Designation of housing:T205-; Weight:0.81 kg; H2:51 mm; L:97 mm; L3:51 mm; N:19mm; N2:32 mm;

Db - Cup Backface Backing Diameter:8.23 in; Design Units:Imperial; e - ISO Factor2:0.37; Cg - Geometry Factor:0.132; Da - Cup Frontface Backing Diameter:8.58 in; Y - ISO Factor3:1.62; r - Cup Backface To Clear Radius1:0.130 in; C - Cup Width:1.9375 in; D:9.25 in; Cup Part Number:95925;

L1:42 mm; J:105 mm; N1:19 mm; G:M6x1; H1:16 mm; s1:30.9 mm; B:34.8 mm; d:23.81 mm; C:14 kN; C0:7.88 kN;

Designation of bearing:EX202G2L4; C:12.8 kN; d:15 mm; Designation of housing:PH204-; H1:15 mm; G:M6x1; L:127 mm; L1:48 mm; Recommended tightening torque for set screw:5.5 Nm; Weight:0.97 kg;

SKU:7919a5trsulp3-nsk; Availability:In Stock; Seals or Shields:Open Type; B:18mm; D:130mm; Static Load Rating (kN):45.5; Grease Limiting Speed (r/min):8900; Preload:Light; Cage Type:Plastic; Dynamic Load Rating (kN):40;

Characteristic outer ring frequency, BPF0:5.59 Hz; Number of lubrication holes:3; Brand:SNR; D:160 mm; Nref:3,600 rpm; D1:138.3 mm; b:10.5 mm; Min operating temperature, Tmin:-40 °C; ra max:2 mm; Nlim:4,200 rpm;

Locking Style:Eccentric; Oil Lubrication - B/C/O Seal:600 rpm; Pre Install Clearance Min:0.075 mm; Full Timken Part Number:QMFY22J408SB; Dimension J (Bolt Size):1 in; Dimension S:5.53 in; Dimension E:6.44 in; Float:0.083 in; Dimension D:10.00 in; Dimension R:0.12 in;

Housing Width:6.8 in; Shaft Size:7-15/16 in; Support Type:Four-Bolt Plummer Bl; Dimension M :8 in; Bearing Type:Split Cylindrical Ex; Dimension K :5 in; Dimension J1 :25 in; Cr - Dynamic Load Rating:136576 lbf; Pillow/Plummer Block Style:Split Cylindrical Ho; Cor - Static Load Rating:

Y1 - ISO Factor5:4.47; Da - Outer Ring Backing Diameter:270.000 mm; Superseded Part:23038KCJW33W40I; d:190.000 mm; Bearing Weight:17.8 Kg; C0 - Static Radial Rating:1580000 N; r - Outer Ring To Clear Radius2:2.0 mm; Reference Thermal Speed Rating (Oil)7:1900; e - ISO Factor3:0.23; Y0 - ISO Factor4:3

Permissible Axial Load (kN):17.8; Dynamic Load Rating (kN):15.1; D:90mm; Static Load Rating (kN):12.5; Weight:0.61 KGS; B:18mm; Clearance:Standard; Oil Limiting Speed (r/min):27600; Seals or Shields:Open Type; d:55mm;