NSK 1212KJ Self Aligning Ball Bearings

Dimension J (Bolt Size):0.750 in; Grease Lubrication - T Seal:1600 rpm; C0 - Static Load:113000 lb; Float:0.083 in; Full Timken Part Number:QAPF20A100SB; Eng Internal Radial Clearance - Min:0.0030; Dimension E:2.25 in; UPC Code:0883450299282; Dimension H:1.40 in; Dimension G:4.310 in;

SNW/SNP Assembly Weight:46.5 lb; D1:13.005 in; S:1.635 in; Tolerance1:-0.007 in; Lockwasher and Lockplates:P-56; Diameter d :9 15/16 in; Sleeve:S-3156 x 9 15/16; Bearing Number:23156K; B2:7.756 in; Taper:1:12;

Unit, Type:Bearing unit; Basic Dynamic Load Rating Cr(N):43500; Unit Body Material:Cast Iron; Days to Ship:9 Days; Bearing Unit, Type:Square flange shape; d:55; Surface Treatment:No; Lubrication method:Oil Supply Type; Surface Treatment:No; Unit, Type:Bearing unit;

T min.:-40 °C; Weight:8.45 kg; s1:64.3 mm; Designation of bearing:EX216-51G2T04; N2:70 mm; C0:54.2 kN; H:184 mm; H2:111 mm; Designation of housing:T216-; T max.:100 °C;

T:38.5 mm; Dynamic load, C:224 kN; da max:96 mm; Product Group:B04334; Y0:0.79; Static load, C0:300 kN; Characteristic outer ring frequency, BPF0:8.58 Hz; Characteristic rolling element frequency, BSF:6.63 Hz; Fatigue limit load, Cu:34.9 kN; Da max:140 mm;

Bearing Material:[Steel] Steel; Flange O.D. H(φ):72; Flange Shape:Square Type; Seals:VV (Non-Contact Rubb; Bearing Part Number:6203; Type:Bearings with Housin; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Width T(mm):60; Volume Discount:Available;

Bearing Unit, Type:Diamond Flange Shape; Stroke:No; Unit, Type:Insert Bearing Unit; Fit:J7; Rolling Element Material:Bearing Steel; Fit:J7; Accessory:With cast iron cover; Bearing Inner Dia. Shape:Cylindrical Bore Set; Rolling Element Material:Bearing Steel; Machining:No;

Grease Type:SH44M; Basic Load Rating, Static Rating(N):40100; Rolling Element Material:Bearing Steel; RoHS:6; Stroke:No; Machining:No; Unit Body Material:Cast Iron; Surface Treatment:No; Surface Treatment:No; Stroke:No;

RoHS:6; Bearing Material:[Steel] Steel; Bearing Retained:No; Type:Bearings with Housin; Bearing Retained:No; Number of Bearings:Single; Holder Surface Treatment:Electroless Nickel P; Flange Shape:Square Type; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea;

Basic Load Rating, Dynamic Rating(N):57200; Bearing Unit, Type:Take-Up Type; Days to Ship:Quote; Unit, Type:Insert Bearing Unit; Stroke:No; Fit:J7; Grease Type:SH44M; Unit Body Material:Cast Iron; Surface Treatment:No; Seal:Silicone;

Bearing I.D. d(mm):12; Number of Bearings:Double; Shape:Flange Type; Width T(mm):20 ～ 40; Flange Shape:Square Type; Number of Bearings:Double; Flange O.D. H(φ):40; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea;

Volume Discount:Available; Width T(mm):50; Flange O.D. H(φ):52; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Shape:Flanged Pilot Type; Housing Material:[Aluminum Alloy] 201; Number of Bearings:Double; Bearing I.D. d(mm):10; Shape:Flanged Pilot Type;

Holder Surface Treatment:Not Provided; Type:Bearings with Housin; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Number of Bearings:Single; RoHS:6; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Shape:Front Mount; Housing Material:304 Stainless Steel;

Unit Body Material:Cast Iron; Pillow Type, Category:Standard; Stroke:No; Grease Type:SH44M; Unit, Type:Insert Bearing Unit; Machining:No; d:35; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; Basic Load Rating, Static Rating(N):17800;

B:56 mm; Da max:214.8 mm; Number of lubrication holes:3; Y0:3.13; Mass:7.5 kg; Min operating temperature, Tmin:-40 °C; e:0.21; ra max:2 mm; Characteristic rolling element frequency, BSF:9.3 Hz; b:10 mm;